|
|
Miller SPECTRUM 125C 12A 230V 1PH 50/60HZ 20FT TORCH
Miller SPECTRUM 125C 12A 230V 1PH 50/60HZ 20FT TORCH
A built-in, heavy-duty compressor makes this a cut-as-you-go machine anywhere power is available.
Built-in, heavy-duty industrial piston-driven compressor provides long life and superior airflow.
Solid-state, constant-current design offers consistent 12 amp cutting arc for continuous quality cutting up to 3/16 in steel in steel.
Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.
LVC™ line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.
Can be powered by any Miller engine drive with generator power (e.g. Bobcat™) or equivalent competitive equipment. See Spec Sheet for kW requirements.
35% duty cycle is tested at 40° C (104° F) to give you the cutting power whenever you need it.
Starts without high-frequency so it will not interfere with or damage controls or computer.
Blow Back Torch Design
The plasma arc is created by pulling an electrical arc between an electrode and tip. This process eliminates high frequency by forcing an electrical arc between the two pieces.
Post Flow Cooling Circuit
Protection to extend the life of consumables and the welding torch is enhanced by our post flow circuit that provides shielding gas after you release the trigger.
Mfg Part #: 907169
If in stock, this item will ship within 1-2 business days.
Detailed specs for Miller SPECTRUM 125C 12A 230V 1PH 50/60HZ 20FT TORCH
Specifications
Rated: 1/8 in (3.2 mm)
Quality: 3/16 in (4.2 mm)
115 V 1 Phase
Input Amperage Circuit Requirement
A 120 volt, 20 amp individual branch circuit.
Rated Output at 104° F (40°C)
12 A at 110 VDC, 35% duty cycle
115V Model with torch: - 50 lb (22.7 kg)
You are currently viewing:
Miller SPECTRUM 125C 12A 230V 1PH 50/60HZ 20FT TORCH
|
