ESAB ESP-50 Mechanized Plasma Cutting Package 208/230V PT-35 50' WR - (0558004379)

• 100% Duty Cycle for enhanced productivity allowing for continuous operation even when operating at maximum thickness.

• Machined torch body with 1-3/8” metal handle and 32-pitch rack fits standard torch holders. Also available without rack.

• Utilizes a “drawn arc” to initiate the cut which eliminates high frequency interference from the starting circuits.

• Robust machined torch components provide for reliability, durability and ease of maintenance.

• Metal nozzle and retaining cup stand up to the toughest cutting conditions.

• Cuts the entire working range with a single set of consumables, thin gauge to 1/2 in. material. This reduces the number of required setups, reduces wear parts inventory and simplifies re-ordering. Two nozzles are offered, one optimized for gauge sheets the other for plate cutting. Either nozzle will cut the entire range.

• Electronically controlled pilot arc provides for consistent starting and incorporates automatic restrike for grate cutting and duct-cutting.

• A full CNC/Robotic interface is standard.

• The console is prewired with a 25 ft. (7.6m) work cable, 50 ft. (15m) CNC interface cable and 6 ft. power cable (3m on CE rated units). Adapter plugs to match competitive system interface cables are available.

• Wear parts are available individually, in sets and in value packs which eases ordering and saves money.

Detailed specs for ESAB ESP-50 Mechanized Plasma Cutting Package 208/230V PT-35 50' WR

• Cuts: 1/2 in (12.7 mm)

• @ 100% duty cycle 50 A

• @ 60 PSIG (117.9 l/min. @ 4.1 bars) 250 CFH

• Width: 10.1 in (275 mm)
• Length: 20.3 in (576 mm)
• Height: 18.3 in (465 mm

• 85 lbs (38.6 kg)

• @ 35 A / 120V 208/230 vac, 1 ph, 50/60 Hz, 46/42 A
• 1 ph. (208/230) 208/230 vac, 1 ph, 50/60 Hz, 46/42 A
• 3 ph. (208/230) vac, 3 ph, 50/60 Hz, 22/20 A
• 3 ph. (208/230) 208/230 vac, 3 ph, 50/60 Hz, 22/20 A
• 3 ph. (230/460) 400/460 vac, 3 ph, 50/60 Hz, 12/11 A

Resources for ESAB ESP-50 Mechanized Plasma Cutting Package 208/230V PT-35 50' WR