ESAB MIG 4HD Lightweight, Four-Roll Drive Wire Feeder - (34154)

• This wire feeder comes complete with internal gas solenoid, 8 ft. control cable, 9-1/2 ft. gas hose with fittings, .035/.045 in. (.9/1.2 mm) drive rolls, and guide tube.

• Designed with safety in mind, the MIG 4HD incorporates low 42 vac input power, low 12v torch circuitry, enclosed wire drive and drive motor overload protection.

• Provides excellent mig welding performance.

• 4-roll drive is standard. Two .035/.045 in. (.9/1.2 mm) dual groove drive rolls and two pressure rolls are included. Can also be used as a 2-roll drive feeder.

• 50-750 ipm (1.3-1.9 mm) wire feed speed range standard.

• Electronic Dynamic Braking for regulated stops.

• Gas purge switch, cold wire inch switch(jog), and remote power source voltage control are standard.

• Quality manufacturing system certified to ISO 9002.

• Three-year warranty.

Detailed specs for ESAB MIG 4HD Lightweight, Four-Roll Drive Wire Feeder

• 50 to 750 in., 1.3 to 19 mm

• 0.023 to 5/64 in., 0.6 to 2 mm

• 42 vac

• 8 Amps

• 29 lbs., 13 kg

• 40 lbs., 18 kg

• 21 in., 533.4 mm

• 9 in., 228.6 mm

• 9.25 in., 235 mm

Resources for ESAB MIG 4HD Lightweight, Four-Roll Drive Wire Feeder