ESAB - Plasmarc PT-26 90 DEG. 25 FT. TORCH

"Excellent cutting capability—cuts up to 3-1/2 in. (88.9 m) and severs 4 in. (101.6 m) using air, nitrogen or argon-hydrogen at 300 amps. Produces clean, high quality cuts. Patent pending safety circuit for enhanced operator safety. Operates with shop or cylinder air, nitrogen or argon-hydrogen at 300 amps. Compact, lightweight design for ease of handling. Long life electrodes lower operating costs. Pilot arc starting—even starts on paint. Gouging nozzle available. Intermittent cutting capacity for grate or expanded metal applications. Gouging guard and stand-off guide available for operator."

Mfg Part #: 36558

If in stock, this item will ship within 1-2 business days.

Detailed specs for ESAB - Plasmarc PT-26 90 DEG. 25 FT. TORCH

"P-26 Start Gas Pressure 30 psig (2.8 BAR) Current Capacity @ 100% duty cycle 200 A Current Capacity @ 60% duty cycle 300 A Maximum Rated Current 300 A Approved Service Gases: Plasma Air, N2, H-35, N2/H2 Mixtures Shield Air, N2, CO2,Ar Length of Service Lines: 25 ft. or 50 ft. (7.6 m or 15.2 m) Min. Gas Supply Flow Requirements: Shield 200 cfh @ 85 psig (94 l/min. @ 6.0 BAR) Plasma 240 cfh @ 80 psig (112 l/min. @ 5.6 BAR) Weight 25 ft.: 16 lbs, 7.3 kg Weight 50 ft.: 28 lbs, 12.7 kg Max. Allowable Inlet Gas Pressure 100 psig (6.9 BAR) Min. Water Supply Flow Requirements 0.9 gpm @ 95 psig Max. Water Inlet Pressure 120 psig (8.3 BAR) Max. Water Temperature 105 F, 40 C "