ESAB - Migmaster-353CV/GM400/TR-29/MIG-4HD

"Three phase primary power for industrial DC MIG welding. High/Low inductance taps for optimized short circuiting welding. Ground Fault Detection (GFD) for optimum safety. Lugged output studs for positive, low cost cable connections are covered. Simple front panel designs with sealed electronics compartment Compatible with 42 vac and 115 vac ESAB wire feeders (Mig 4HD, Mig-35, Digimig, DuraDrive). 115 vac outlet for water circulator or tools. Auto Fan™ installed. Three-year warranty."

Mfg Part #: 37656

If in stock, this item will ship within 1-2 business days.

Detailed specs for ESAB - Migmaster-353CV/GM400/TR-29/MIG-4HD

"353cv Power Source Rated DCCV Output* (10 min base) @ 100 % duty cycle 350 amps@ 34 vdc, 50/60 Hz @ 60 % duty cycle 450 amps @ 34 vdc, 50/60 Hz Primary Input Voltage and Current @ rated 100 % duty cycle load 230/460 vac 60 Hz, 3 ph, 50(55)/25 A 230/460/575 vac 60 Hz, 3 ph, 50/25/20 A 220/400 (380-415) vac 50 Hz, 3 ph, 52/29(31-28) A Open Circuit Range 50/60 Hz, 13 to 45 vdc Power Factor @ rated load 83 % Auxilliary Output Power (receptacle) 115 vac, 50/60 Hz, 10 Amps Net Weight** 331 lbs., 150 kg, 60 Hz Shipping Weight** (approximate) 341 lbs., 155 kg, 60 Hz Width 18.75 in., 476.3 mm Length 32.5 in., 825.5 mm Height 25 in., 635 mm * For 208 vac, 60 Hz and 380 vac, 50 Hz service, derate output current rating 10%. ** For 50 Hz models, add 40 lb. (18 kg). "