Hypertherm Powermax 190c

The Powermax190c plasma cutting system takes professional metal-cutting power where it has never been before. Just plug it into most household power and you're in business. And don't worry about providing separate air, because a built-in compressor gives you all that you'll need. You'll be able to cut most sheet metals virtually anywhere.

Product overview
The Powermax190c, with integrated air compressor, offers superior portability for cutting thin sheets up to 3/16" (5 mm).

Hand torch cut capacity
Recommended: up to 1/8"" (3 mm) at cutting speeds of 22" (558 mm) per minute
Maximum: up to 3/16"" (5 mm) at cutting speeds of 16"" (406 mm) per minute
Severance: up to 1/4"" (6 mm) at slow speed

Powermax190c Makes These Industries More Productive:

• HVAC fabrication and installation
• Building contractors - metal studs
• Trade contractors - mechanical
• Auto and truck service and repair
• Factory and farm maintenance
• Art and decorative metal
• Other sheet metal applications

Advanced Power Supply

• Superior power supply design delivers proven Hypertherm performance in a compact, truly portable package.
• 1.32 kW output delivers superior cutting power from a 120 V (or 230 V, 1 PH international) outlet for the sheet metal professional.
• Built-in air compressor provides required gas.
• Boosted open-circuit voltage rating can accommodate low-line conditions of -20% typical on work sites or when utilizing extension cords.
• Advanced electronic architecture provides constant current control for consistent quality on varying power levels.
• A chopper power supply provides superior energy efficiency over competitive droopers.

Superior Field Reliability for the Professional Contractor or Sheet Metal Worker
The Powermax190c is designed to travel and work hard at the toughest job sites. Over 30 years of research and development dedicated exclusively to plasma cutting results in reliability that is unsurpassed.

Intelligent Torch Design

• Higher Speed and Capacity. Total cutting power is a product of output current (amps) and output voltage. The PAC105 torch is designed to generate a boosted output voltage - rated at 110 volts - producing up to 45% more total cutting power than typical competitors with the same output current.
• Longer Consumable Life. HyLifeT electrodes last longer than ordinary designs (300% longer, in some tests) by using the same hafnium-sizing technologies developed for Hypertherm's advanced mechanized systems.Longer Consumable Life. HyLifeT electrodes last longer than ordinary designs (300% longer, in some tests) by using the same hafnium-sizing technologies developed for Hypertherm's advanced mechanized systems.
• Easier Operation. An optional patented nozzle shield (shown below) provides additional nozzle protection and allows superior, no-stick drag cutting and template following.
• No Interference. A patented "blow-back" torch design provides a strong pilot arc for penetrating rust, paint and other coatings without the high-frequency interference that can damage sensitive electronics (PCs, phone systems, machine controllers, automobile microchips).
• Rugged Operation. No breakable ceramics threaten the life of the torch. The durable, high-impact clamshell handle provides years of reliable service.
• Cooler Operation. A standard post-flow feature provides torch cooling after the cut for longer torch life and easier consumable handling. An interrupt feature automatically stops the post-flow on re-trigger for rapid re-fire.
• Safe Starting. Hypertherm's patented safety trigger protects against accidental starts.
• Ready Access to Consumables. A built-in parts compartment keeps consumables close at hand.

Mfg Part #: 070783

If in stock, this item will ship within 1-2 business days.

Detailed specs for Hypertherm Powermax 190c

Specifications
Input Voltages	120 V, 1 PH, 60 Hz, CSA 230 V, 1 PH, 50/60 Hz, CE
Input Current @ 1.32 kW	120 V: 20 Amps 230 V: 10 Amps
Output Voltage	110 VDC
Output Current	12 Amps
Duty Cycle	35% @ 12 Amps, 40C (104F) on 20/10 A circuit
Maximum OCV	335 VDC
Dimensions	15.8" (400mm) D; 8.5"(216mm) W; 12" (305MM) H
Weight with Torch	120 V: 50 lbs (25 kg) 230 V: 58 lbs (29 kg)
Gas Supply	On-board air compressor

Operating Data for Mild Steel
	Hand Torch
Recommended Capacity	1/8" (3 mm)
Maximum Capacity	3/16" (4.5 mm)
Severance Capacity	1/4" (6 mm)