Hypertherm Powermax 1000 200-600V 1/3-PH Plasma Cutter with 25' Hand-Held Torch
|
|
Item #: HYP083178
Price: $2,870.00 |
The Powermax 1000 is being replaced by the Powermax 65 on September 7th. The Powermax 65 will not begin shipping until late september at the earliest.
The Powermax 1000 will be available for purchase until the supply runs out, at that point it will be discontinued. All replacement parts and consumables for the Powermax 1000 will continue to be supported and supplied by Hypertherm.
The Powermax1000 plasma cutting system cuts over 50% faster than any other competitor tested on 3/4" (19 mm) mild steel.
Hand torch cut capacity
The Powermax 1000 will be available for purchase until the supply runs out, at that point it will be discontinued. All replacement parts and consumables for the Powermax 1000 will continue to be supported and supplied by Hypertherm.
The Powermax1000 plasma cutting system cuts over 50% faster than any other competitor tested on 3/4" (19 mm) mild steel.
Hand torch cut capacity
- Recommended: up to 3/4" (19 mm) at cutting speeds of 22" (559 mm) per minute
- Maximum: up to 1" (25 mm) at cutting speeds of 12" (304 mm) per minute
- Severance: up to 1-1/4" (32 mm) at slow speed
- Auto-voltage™ automatically adapts to any incoming power from 200 V – 600 V, 1- or 3-phase
- Coaxial-assist™ jet technology delivers fast cut speeds
- Boost Conditioner™ compensates for input voltage variations, providing improved performance on low-line voltage, on motor generators and on fluctuating input power
- Reliability-focused design improves uptime and maximizes return on investment
- CNC interface and Easy Torch Removal (ETR™) provide increased versatility for handheld and mechanized use
- T60 hand torch
- T60M machine torch
- Metal Service Centers
- Metal Scrapping and dismantling
- Industrial construction
- Welding repair services
- Industrial equipment manufacturing and repair
- Commercial ship manufacturing and repair
- Truck and trailer manufacturing and repair
- Farming and logging
- Vocational training
- 60 amps, 8.4 kW output
- Auto-voltage circuit
- Boost Conditioner circuit
- Standard CNC interface
- Pilot arc controller with deactivation switch
- Dual-threshold pilot arc circuit
- Gouging metal removal rate of 11 lbs. (4.9 kg) per hour
Mfg Part #: 083178
Availability
If in stock, this item will ship within 1-2 business days.
Detailed specs for Hypertherm Powermax 1000 200-600V 1/3-PH Plasma Cutter with 25' Hand-Held Torch
| Specifications | |
| Input Voltages | 200-600 V, 1- or 3-PH, 50/60 Hz, CSA 230-400 V, 3-PH, 50/60 Hz, CE |
| Input Current @ 12 kW | 200/208/230/240/480 V, 1-PH: 50/48/44/42/22 A 200/208/230/240/400/480/600 V, 3-PH: 30/29/26/24/15/12/11 A |
| Output Voltage | 140 VDC |
| Duty Cycle @ 40C (104F) | 50% @ 60 A, 230-600, 3-PH 50% @ 60 A, 480 V, 1-PH 40% @ 60 A, 200-208 V, 3-PH 40% @ 60A, 200-208 V, 1-PH |
| Maximum OCV | 300 VDC |
| Dimensions | 23.1" (586mm) D; 10.7"(271mm) W; 19.6" (498MM) H |
| Weight with Torch | 83 lbs (37 kg) |
| Gas Supply | Clean, dry, oil-free air or nitrogen |
| Operating Data for Mild Steel | |
| Hand Torch Cutting Capacity | |
| Recommended Capacity | 3/4" (19 mm) |
| Maximum Capacity | 1" (25 mm) |
| Severance Capacity | 1-1/4" (32 mm) |
You are currently viewing:
Hypertherm Powermax 1000 200-600V 1/3-PH Plasma Cutter with 25' Hand-Held Torch
