Hypertherm Powermax 1000 Manual Plasma Cutting Machine w/ 50' torch - 083179

The Powermax1000 plasma cutting system cuts over 50% faster than any other competitor tested on 3/4" (19 mm) mild steel.

Hand torch cut capacity
Recommended: up to 3/4" (19 mm) at cutting speeds of 22" (559 mm) per minute
Maximum: up to 1" (25 mm) at cutting speeds of 12" (304 mm) per minute
Severance: up to 1-1/4" (32 mm) at slow speed

Machine torch cut capacity
Recommended: up to 3/8" (10 mm)
Maximum: up to 1/2" (12 mm) (Cutting above requires an edge start)

Power supply features

• 60 amps, 8.4 kW output
• Auto-voltage circuit
• Boost Conditioner circuit
• Standard CNC interface
• Pilot arc controller with deactivation switch
• Dual-threshold pilot arc circuit
• Gouging metal removal rate of 11 lbs. (4.9 kg) per hour

Mfg Part #: 083179

If in stock, this item will ship within 1-2 business days.

Detailed specs for Hypertherm Powermax 1000 Manual Plasma Cutting Machine w/ 50' torch - 083179

Specifications
Input Voltages	200-600 V, 1- or 3-PH, 50/60 Hz, CSA 230-400 V, 3-PH, 50/60 Hz, CE
Input Current @ 12 kW	200/208/230/240/480 V, 1-PH: 50/48/44/42/22 A 200/208/230/240/400/480/600 V, 3-PH: 30/29/26/24/15/12/11 A
Output Voltage	140 VDC
Duty Cycle @ 40C (104F)	50% @ 60 A, 230-600, 3-PH 50% @ 60 A, 480 V, 1-PH 40% @ 60 A, 200-208 V, 3-PH 40% @ 60A, 200-208 V, 1-PH
Maximum OCV	300 VDC
Dimensions	23.1" (586mm) D; 10.7"(271mm) W; 19.6" (498MM) H
Weight with Torch	83 lbs (37 kg)
Gas Supply	Clean, dry, oil-free air or nitrogen

Operating Data for Mild Steel
	Hand Torch Cutting Capacity
Recommended Capacity	3/4" (19 mm)
Maximum Capacity	1" (25 mm)
Severance Capacity	1-1/4" (32 mm)