Hypertherm Powermax 1250 200-600V 1/3PH Plasma Cutter with 25' Hand-Held Torch
|
|
Item #: HYP087008
Price: $3,770.00 |
The Powermax 1250 is being replaced by the Powermax 85 on September 7th. The Powermax 85 will not begin shipping until late september at the earliest.
The Powermax 1250 will be available for purchase until the supply runs out, at that point it will be discontinued. All replacement parts and consumables for the Powermax 1250 will continue to be supported and supplied by Hypertherm.
The Powermax1250 cuts 80% faster than any other competitor tested on 1" (25 mm) mild steel.
Hand torch cut capacity
The Powermax 1250 will be available for purchase until the supply runs out, at that point it will be discontinued. All replacement parts and consumables for the Powermax 1250 will continue to be supported and supplied by Hypertherm.
The Powermax1250 cuts 80% faster than any other competitor tested on 1" (25 mm) mild steel.
Hand torch cut capacity
- Recommended: up to 7/8" (22 mm) at cutting speeds of 23" (584 mm) per minute
- Maximum: up to 1-1/8" (29 mm) at cutting speeds of 10" (254 mm) per minute
- Severance: up to 1-1/2" (38 mm) at slow speed
- Auto-voltage™ automatically adapts to any incoming power from 200 V – 600 V, 1- or 3-phase
- Coaxial-assist™ jet technology delivers fast cut speeds
- Boost Conditioner™ compensates for input voltage variations, providing improved performance on low-line voltage, on motor generators and on fluctuating input power
- Reliability-focused design improves uptime and maximizes return on investment
- CNC interface and Easy Torch Removal (ETR™) provide increased versatility for handheld and mechanized use
- T80 hand torch
- T80M machine torch
- Metal Service Centers
- Metal Scrapping and dismantling
- Industrial construction
- Welding repair services
- Industrial equipment manufacturing and repair
- Commercial ship manufacturing and repair
- Truck and trailer manufacturing and repair
- Farming and logging
- Vocational training
- 80 amps, 12 kW output
- Auto-voltage circuit
- Boost Conditioner circuit
- Standard CNC interface
- Pilot arc controller with deactivation switch
- Dual-threshold pilot arc circuit
- Gouging metal removal rate of 15 lbs. (6.8 kg) per hour
Mfg Part #: 087008
Availability
If in stock, this item will ship within 1-2 business days.
Detailed specs for Hypertherm Powermax 1250 200-600V 1/3PH Plasma Cutter with 25' Hand-Held Torch
| Specifications | |
| Input Voltages | 200-600 V, 1- or 3-PH, 50/60 Hz, CSA 230-400 V, 3-PH, 50/60 Hz, CE |
| Input Current @ 12 kW | 200/208/230/240/480 V, 1-PH: 70/70/60/58/31 A 200/208/230/240/400/480/600 V, 3-PH: 41/40/37/34/21/17/17 A |
| Output Voltage | 150 VDC |
| Duty Cycle @ 40C (104F) | 60% @ 80 A, 230-600, 3-PH 60% @ 80 A, 480 V, 1-PH 50% @ 80 A, 240 V, 1-PH 50% @ 80A, 200-208 V, 3-PH 40% @ 80 A, 200-208 V, 1-PH |
| Maximum OCV | 300 VDC |
| Dimensions | 23.1" (586mm) D; 10.65"(271mm) W; 19.6" (498MM) H |
| Weight with Torch | 96.6 lbs (44 kg) |
| Gas Supply | Clean, dry, oil-free air or nitrogen |
| Operating Data for Mild Steel | |
| Hand Torch Cutting Capacity | |
| Recommended Capacity | 7/8" (22 mm) |
| Maximum Capacity | 1-1/8" (29 mm) |
| Severance Capacity | 1-1/2" (38 mm) |
You are currently viewing:
Hypertherm Powermax 1250 200-600V 1/3PH Plasma Cutter with 25' Hand-Held Torch
