Lincoln AC/DC 225/125
Easy to install. Comes with attached input power cable and plug.
Easy to operate with front mounted AC/DC polarity switch and full range amperage selector switch for accurate and dependable procedure setting.
Traditional design provides long-life and low cost operation.
Compact size allows for easy storage and handling.
AC or DC welding output for complete stick welding versatility.
Smooth arc makes it easy to weld with different electrodes, including mild steel, low hydrogen, stainless steel and hardfacing electrodes.
Use the electrode polarity switch on the front of the machine to select a DC welding arc where a stable arc is essential.
Select an AC welding arc for large diameter general purposes electrodes for welding heavier plate where higher deposition rates and travel speeds are desired.
Electrode selection chart on the machine case provides quick and easy reference guide for amperage selection.
225 amp AC output is enough for 3/16" diameter general purpose mild steel electrodes and 5/32" sizes of other electrodes.
125 amp DC output is enough for most 1/8" electrodes.
Fan-cooled for extra thermal protection.
Vermin resistant mesh bottom keeps rodents and pests out of the case.
Powder paint finish for high corrosion resistance.
NEMA rated (60 Hz only).
UL listed and CSA approved (60 Hz only).
3 year warranty on parts and labor.
Manufactured under a quality system certified to ISO 9001 requirements.
Mfg Part #: K1297
If in stock, this item will ship within 1-2 business days.
Detailed specs for Lincoln AC/DC 225/125
Weight:124 lbs. (56.3 kgs. )
Dimensions (in) H x W x D : 24 x 17.25 x 12
Dimensions (mm) H x W x D : 610 x 438 x 305
Rated CC AC Output Amps/Volts/Duty Cycle: 225/25/20%
Rated CC DC Output Amps/Volts/Duty Cycle: 125/25/20%
Output Range:
30-125A DC
40-225A AC
