| The SP-175 Plus is all about welding power and control! This work-loving, compact, portable wire feeder/welder makes MIG or flux-cored welding on mild steel easy. MIG welding on stainless steel or aluminum can be simple as well. Continuous output controls on the 208/230V powered SP-175 Plus let you fine-tune both the wire feed speed and the voltage output ? so you get a quality weld time after time! And getting started on your mild steel project with MIG welding is straightforward ? just add a cylinder of shielding gas and personal safety equipment. |
Advantage Lincoln:
? Ready To Weld! Includes mild steel MIG wire and adjustable gas regulator and hose kit. Just add shielding gas and personal safety equipment (sold separately).
? Continuous full-range adjustment of voltage and wire feed speed allows for fine-tuning of the arc and precise control of arc energy, or heat input.
? MIG weld on mild steel as thin as 24 gauge with .025" SuperArc™ L-56 wire. Flux-cored wire weld up to 5/16" mild steel plate with Innershield® NR®-211-MP and up to 1/2" plate with .045" Innershield NR-212. Add K663-2 to weld 22 gauge through 1/4" aluminum.
? Designed to feed .023-.035" (0.6-0.9mm) diameter mild and stainless steel MIG wire, .035"-.045" (0.9mm-1.2mm) diameter flux-cored wire and .035" diameter 4043 aluminum MIG wire.
? Welder settings reference chart conveniently located inside wire feed section door makes it easy to set the machine for mild steel welding jobs.
? Gun trigger safety feature keeps welding wire electrically "cold" until trigger is pressed.
? Adjustable brake spindle accommodates both 8" (200mm) diameter and 4" (100mm) diameter spools of wire.
? Built-in "burnback" function insures proper wire stick-out after each weld with no sticking in the weld puddle.
? Three year warranty on parts and labor. (90 days warranty on gun and cable).
|
? Magnum® 100L welding gun and 10 ft. (3.0m) cable assembly, with gas nozzle, .023-.035" (0.6-0.9mm) cable liner and .023/.025" (0.6mm) contact tip.
? 10 ft. (3.0m) work cable and clamp.
? 6 ft. (1.8m) input power cord with 230 volt, 50 amp NEMA Type 6-50P three-prong plug.
? Guide tubes and reversible drive roll ready to feed Lincoln?s .025" (0.6mm), .030" (0.8mm) and .035" (0.9mm) diameter SuperArc™ L-56 MIG wire and .035" (0.9mm) diameter Innershield® NR®-211-MP flux-cored wire.
? Factory installed gas solenoid valve for MIG welding.
? Adjustable gas regulator and 4.5 ft. (1.37m) hose for argon and argon-blend gases. Gas regulator requires an S19298 adapter (sold separately) for use with CO2 cylinders.
? 2 lb. (0.90kg) spool of .025" (0.6mm) SuperArc L-56 wire.
? One .030" (0.8mm) and one .035" (0.9mm) contact tip.
? One-Pak™ (Order K2300-1) includes everything above plus Welding Cart (K2275-1).
|
