| Lincoln's SP-180T gives you the power you need, the portability you want, and the performance you demand! Just plug this quality-driven wire feeder/welder into a 208 or 230V outlet in your garage, barn or shop, and start crossing projects off your list! The SP-180T package includes most of the essentials for MIG welding on mild steel ? there's even a spool of SuperArc™ MIG wire! Simply add a cylinder of shielding gas and you're good to go. If you're a stickler for quality, you'll love the outstanding arc performance this well-engineered machine delivers! |
Advantage Lincoln:
? MIG weld on mild steel as thin as 24 gauge with .025" SuperArc™ L-56 wire. Flux-cored wire weld up to 5/16" mild steel plate with Innershield® NR-211-MP and up to 1/2" plate with .045" Innershield NR-212 (sold separately). Install K664-2 to weld 22 gauge through 1/4" aluminum.
? Designed to feed .023-.035" (0.6-0.9mm) diameter mild and stainless steel MIG wire, .035-.045" (0.9-1.2mm) diameter flux-cored wire and .035" diameter 4043 aluminum MIG wire.
? Ready to weld! Includes mild steel MIG wire and adjustable gas regulator and hose kit. Just add shielding gas (sold separately).
? Large easy to set knobs provide 5-position adjustable tap voltage control and continuous full-range control of wire feed speed.
? Welder settings reference chart conveniently located inside wire feed section door makes it easy to set the machine for your application.
? Gun trigger safety feature keeps welding wire electrically "cold" until trigger is pressed.
? Three year Lincoln Warranty on parts and labor. (90 days warranty on gun and cable).
? Manufactured under a quality system certified to ISO 9001 requirements.
|
? Magnum® 100L welding gun and 10 ft. (3.0m) cable assembly, with gas nozzle, .023"-.035" (0.6-0.9mm) cable liner and .023/.025" (0.6mm) contact tip.
? 10 ft. (3.0m) work cable and work clamp.
? 6 ft. (1.8m) input power cord with 230 volt, 50 amp NEMA Type 6-50P three-prong plug.
? Guide tubes and reversible drive roll ready to feed Lincoln?s .025" (0.6mm), .030" (0.8mm) and .035" (0.9mm) diameter SuperArc L-56 MIG wire and .035" (0.9mm) diameter Innershield® NR®-211-MP flux-cored wire.
? Factory installed gas solenoid valve for MIG welding.
? Adjustable gas regulator and 4.5 ft. (1.37m) hose for argon and argon-blend gases. Gas regulator requires an S19298 adapter (sold separately) for use with CO2 cylinders.
? 2 lb. (0.90kg) spool of .025" (0.6mm) SuperArc L-56 wire.
? .030" (0.8mm) contact tip.
|
