Lincoln 400XA Fume Extn MIG Gun 15 ft 052-1/16 60 deg - (K556-14)

Lincoln 400XA Fume Extn MIG Gun 15 ft 052-1/16 60 deg

The Magnum 400XA guns are designed for use with gas-shielded solid and flux-cored wires. The two-piece ergonomically designed handle minimizes size, while the non-slip grooves provide maximum comfort and control. A metal and cloth reinforced rubber bellows located directly behind the gun handle provides excellent flexibility and decreases operator fatigue. These guns are factory installed with a Fast-Mate European style wire feeder connector. All Magnum fume extraction guns can be used with virtually any Lincoln or non-Lincoln semiautomatic wire feeder. The 400XA must be used with the appropriate adapter kit.

Advantage Lincoln:

A variety of gun tube angles are available for most Magnum fume exhaust guns, providing the versatility to weld on a wide range of joint configurations.

Guns come ready to weld and can be used with a variety of wire sizes by choosing the appropriate contact tip and cable liner.

Heavy duty gun trigger switch for positive electrical contact and long life.

All guns have a duty cycle of 60% and meet NEMA specification EW3.

Detailed specs for Lincoln 400XA Fume Extn MIG Gun 15 ft 052-1/16 60 deg

Gun Tube Angle:

60

Duty Cycle at Rated Amperage:

.6A

Wire Diameter in (mm):

.035-.045 (0.9-1.2)

Cable Length:

15 ft.

Rated Amperage:

400A

Resources for Lincoln 400XA Fume Extn MIG Gun 15 ft 052-1/16 60 deg