Miller SuitCase X-TREME 8VS Compact Wire Feeder w/ Bernard Q300 Gun, Meters, & Trigger Hold - (951183)

• NEW! X-TREME 8VS — Now in smaller 8VS size for wherever a lighter, smaller, more portable feeder is required.

• Ergonomically sound, lightweight unit is well balanced for ease of carrying to remote welding sites.

• Fits through a 14 in (25 mm) manhole/manway.

• Polypropylene case with built-in slide rails and the ability to open the door to change wire with the feeder in a vertical position.

• Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability

• Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation.

• Improved contactor for high-amperage, high duty cycle applications.

• Trigger hold, wire jog, and gas purge are located on front panel (8VS: trigger hold is optional).

• Digital meters with SunVision™ technology can display voltage and wire speed, and also amperage if desired.

• Meters can be seen clearly even in direct sunlight (8VS: meters are optional).

• Wider voltage range for small and large wires with no contactor chatter or arc outages.

• Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.

• Excellent starts and superior arc performance for all types and sizes of wires whether using CV or CC power supply.

Detailed specs for Miller SuitCase X-TREME 8VS Compact Wire Feeder w/ Bernard Q300 Gun, Meters, & Trigger Hold

• Operates on open-circuit voltage and arc voltage 14-48 VDC/110 Max OCV

• 8VS Models
• Solid Wire: .023-.062 in (0.6-1.6 mm)
• Flux Cored: .030-.062 in (0.8-1.6 mm)

• 12VS Models
• Solid Wire: .023-5/64 in (0.6-2.0 mm)
• Flux Cored: .030-5/64 in (0.8-2.0 mm)

• 50 - 780 IPM (1.3 - 19.8 m/min) Actual range in CC mode is dependent on arc voltage.

• 8VS: 8 in (203 mm), 14 lb (6.4 kg)
• 12VS: 12 in (305 mm), 45 lb (20.4 kg)

• 8VS: 28 lb (13 kg)

Resources for Miller SuitCase X-TREME 8VS Compact Wire Feeder w/ Bernard Q300 Gun, Meters, & Trigger Hold