Miller Dynasty 200 DX AC/DC TIG/Stick Welder - Water-Cooled TIGRunner Package - (907099021)

• NEW! Complete water-cooled packages One stock number provides all the necessary items required for a water-cooled TIG welding system.

• AC TIG Features

• NEW! Blue Lightning - High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. Preset parameters for tungsten sizes from .020 - 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications, custom settings are programmable.

• Extended AC Balance (30-99%) controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.

• AC frequency (20-250 hz) controls the width of the arc cone and the force of the arc.

• NEW! AC Waveforms

• Advance Squarewave, fast freezing puddle, deep penetration, and fast travel speeds.

• Soft Squarewave for a soft buttery arc with maximum puddle control and good wetting action.

• Sine wave for customers that like a traditional arc. Quiet with good wetting.

• Triangular wave reduces the heat input and is good on thin aluminum. Fast travel speeds.

• DC TIG Features

• Exceptionally smooth and precise arc for welding exotic materials.

• Stick Features (AC/DC)

• Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.

• Hot Start adaptive control provides positive arc starts without sticking.

• AC frequency control adds additional stability when Stick welding in AC for smoother welds.

• Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.

• Built-in pulser reduces heat input; adds arc stability (DX model only).

• Fan-On-Demand cooling system only operates when needed.

• Auto-Line provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site.

• Portable in the shop or at the job site - at 45 lb the unit is easily moved from location to location.

• Lift-Arc start provides TIG arc starting without the use of high frequency.

• Wind Tunnel Technology is an Internal air flow that protects electrical components and PC boards from dirt, dust, and debris, greatly improving reliability.

• LVC Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power ± 10%.

• Squarewave technology is the AC output of a power source that has the ability to rapidly switch between the positive and negative half cycles of alternating current.

• Thermal Overload Protection Internal components are protected from damage by thermal overload protection automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.

Detailed specs for Miller Dynasty 200 DX AC/DC TIG/Stick Welder - Water-Cooled TIGRunner Package

• 3- or 1-Phase Power

• 200 A at 18 V, 20% Duty Cycle
• 150 A at 16 V, 60% Duty Cycle
• 140 A at 15.6 V, 40% Duty Cycle
• 100 A at 14 V, 100% Duty Cycle

• 200 A at 28 V, 20% Duty Cycle
• 130 A at 25.2 V, 60% Duty Cycle
• 100 A at 24 V, 60% Duty Cycle
• 90 A at 23.6 V, 100% Duty Cycle

• 1-200 Amps (1-150 on 120 VAC)

• 45 lb (20.5 kg)

Miller Dynasty 200 DX AC/DC TIG/Stick Welder - Water-Cooled TIGRunner Package comes complete with:

Resources for Miller Dynasty 200 DX AC/DC TIG/Stick Welder - Water-Cooled TIGRunner Package

Manufacturer's Resources

- Product Fact Sheet
- Owner's Manual
- Warranty Information
- Miller TIG Welding Resources

General Welding Information

- Common Welding Supplies
- Welding Equipment
- Welding Fume Ventilation
- Welding Gear and Safety Tips
- Welding Generators Offer Emergency Power

TIG Welding Articles

- TIG Welding Process Tips
- Overview of TIG Welding
- Motorsports TIG Welding Packages
- TIG Welding Supplies
- TIG Welder Selection
- TIG Welding: Aluminum Bike Frame

TIG Welding How-to Videos

- How to TIG Weld Aluminum
- How to Tig Weld Brass
- Tig Welding
- Tig Welding Motor Mounts Video

Home Welding Projects

- How to Weld a Table
- How to Make Extra Money from Welding Projects
- Video-How to Weld Dining Room Chairs
- Hobby Welding Projects for Beginners
- Welding a Dolly
- Small Welding Projects from Scrap
- Some Project Ideas
- Beginner Welding Projects
- Shop Stool
- Fun Welding Projects
- Reusable Welding Jig
- Video-Finishing Welding Projects with Proper Post Weld Cleaning
- Christmas Welding Projects