Miller XMT 350 CC/CV Multiprocess Inverter, 208-575 V - (907161)

• The XMT 350 CC/CV is the cornerstone of the XMT family, packed with DC weld processes, outstanding arc characteristics, and features that make it the benchmark for inverter welding machine reliability.

• Auto-Line™ Power Management technology allows for any input voltage hook-up (208-575V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.

• 350 amps of welding output at 60% duty cycle enables improved deposition through using larger diameter electrodes common in construction applications.

• Tweco-style output connectors provided standard on the XMT-350 VS. Eliminates the need for cable adapters at the construction site.

• Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition.

• Exceptional electrical efficiency. At 400 amps, efficiency is 87.24%, this helps to reduce the utility bill or fuel supply required to weld.

• Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.

• Auto Remote Sense enables unit to automatically use remote control if connected to remote control receptacle (CC/CV models only).

• Reduced OCV operation - an internal dip switch enables reduced open-circuit voltage Stick welding capability. OCV is typically below 15 volts.

• Process selector switch reduces the number of control setup combinations without reducing any features.

• Large, dual digital meters are easy to view and presettable to ease setting weld output.

• Pulsed MIG capabilities with optional Optima™ control reduces spatter and distortion, allows better out-of-position puddle control, and provides potential reduction of fume particle emission. (Not available on XMT 350 VS)

• Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.

• Optional 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators, etc. (Not available on XMT 350 VS)

• Optional gas solenoid for TIG welding.

• Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.

• Lift-Arc™ start provides TIG arc starting without the use of high frequency.

• Wind Tunnel Technology™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.

• Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.

• LVC™ Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power ± 10%.

• Drop-Down Panel easy-to-use controls are "under the cover" of the XMT 350 CC/CV and XMT 350 VS.

Detailed specs for Miller XMT 350 CC/CV Multiprocess Inverter, 208-575 V

• Requires 3- or 1-phase power

• 350A at 34VDC, 60% Duty Cycle, 3- Phase
• 300A at 32VDC, 60% Duty Cycle, 1- Phase

• 5 - 425 A, in CC mode
• 10 - 38 V, in CV mode

• 80 lb (36.6 kg)

Miller XMT 350 CC/CV Multiprocess Inverter, 208-575 V comes complete with:

Resources for Miller XMT 350 CC/CV Multiprocess Inverter, 208-575 V