Miller XMT 350 VS Link-Free Multiprocess inverter - (907224)

• The XMT 350 VS is a simplified version of the full featured 350 CC/CV model and is ideal for Construction or Fabrication applications utilizing voltage sensing wire feeders without remote control. Providing true "CV" MIG welding capability and superior "CC" Stick and TIG welding capability.

• Auto-Line™ Power Management technology allows for any input voltage hook-up (208-575V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.

• 350 amps of welding output at 60% duty cycle enables improved deposition through using larger diameter electrodes common in construction applications.

• Tweco-style output connectors provided standard on the XMT-350 VS. Eliminates the need for cable adapters at the construction site.

• Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition.

• Exceptional electrical efficiency. At 400 amps, efficiency is 87.24%, this helps to reduce the utility bill or fuel supply required to weld.

• Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.

• Reduced OCV operation - an internal dip switch enables reduced open-circuit voltage Stick welding capability. OCV is typically below 15 volts.

• Process selector switch reduces the number of control setup combinations without reducing any features.

• Large, dual digital meters are easy to view and presettable to ease setting weld output.

• Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.

• Optional gas solenoid for TIG welding.

• Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.

• Lift-Arc™ start provides TIG arc starting without the use of high frequency.

• Wind Tunnel Technology™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.

• Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.

• LVC™ Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power ± 10%.

• Drop-Down Panel easy-to-use controls are "under the cover" of the XMT 350 CC/CV and XMT 350 VS.

Detailed specs for Miller XMT 350 VS Link-Free Multiprocess inverter

• Requires 3- or 1-phase power

• 350A at 34VDC, 60% Duty Cycle, 3- Phase
• 300A at 32VDC, 60% Duty Cycle, 1- Phase

• 5 - 425 A, in CC mode
• 10 - 38 V, in CV mode

• 80 lb (36.6 kg)

Miller XMT 350 VS Link-Free Multiprocess inverter comes complete with:

Resources for Miller XMT 350 VS Link-Free Multiprocess inverter