Miller - (907303)

• Plasma cutter
• ICE-27T hand-held torch with 12 ft (3.7 m) cable.
• Heavy-duty work clamp with 12 ft (3.7 m) cable
• X-CASE model provides protection in transport and storage
• 10 ft (3 m) MVP power cord
• Consumables box with 3 electrodes, 3 tips and air fitting
• MVP plugs 5-15P (115 V, 15 A), 6-50P (230 V, 50 A)

• Auto-Line™ and MVP™ Plugs make this 18 pound unit the most portable ever!

• X-TREME™ Versatility - Auto-Line provides state-of-the-art flexibility. Automatically connects to 115-230 VAC, single-phase power, 50/60 Hz, without removing covers to relink the unit. No longer is there a concern if you have the correct machine for the shop or job site.

• X-CASE™ provides ultimate protection during transport and storage. Additional space ideal for MVP plugs, consumable box, as well as gloves, eye protection, etc.

• X-TREME™ Portability Portable in the shop or at the job site - at 18 pounds the shoulder strap allows you to easily move from location to location.

• Miller's exclusive multi-voltage plug (MVP™) allows connection to 115 or 230 V receptacles without tools - choose the plug that fits the receptacle and connect it to the power cord.

• LVC™ line voltage compensation provides peak performance power under variable conditions (power fluctuations up to +/-15%) for steady cuts and cleaner ending cuts.

• Can be powered by any Miller engine drive with generator power (e.g. Bobcat™) or equivalent competitive equipment.

• LED indicators for pressure, power, cup and temperature allow faster troubleshooting, eliminating unnecessary downtime.

• Ergonomic design ICE-27T torch with increased comfort, safety trigger, and improved swirl ring and cup.

• Factory pre-set air - no need to adjust the air pressure! The unit automatically regulates the proper internal air pressure to the torch.

• Gas/air filter/regulator inside the power source provides added protection during transportation. Standard air connection on back panel for easy gas or air hookup.

• Starts without high-frequency so it will not interfere with or damage controls or computers.

• Includes heavy-duty clamp.

Detailed specs for Miller

• Rated: 3/8 in (10 mm)
• Quality: 1/2 in (13 mm)
• Sever: 5/8 in (16 mm)

• 115 - 230 V 1 Phase

• A 120 volt, 20 amp (min.) - 30 amp recommended or 230 volt, 15 amp (min.) individual branch circuit

• 4.5 CFM (128 L/min.) at 90 PSI (621 kPa)

• 27 A at 92 VDC, 35% Duty Cycle (240 V input)

• with torch: 18 lb (8.2 kg)

Resources for Miller