Miller - (907305013)

• ICE-100TM machine-held torch with 25 ft (7.6 m) cable and remote interface cables
• Heavy-duty work clamp with 25 ft (7.6 m) cable
• 10 ft (3 m) power cord
• Extra consumables
• CNC/robotic remote cable kit (included w/machine-held torch pkg)

• Auto-Line™ automatically connects unit to any primary input voltage from 208 to 575 volts, three-phase, 50 or 60 Hz.

• LVC™ line voltage compensation provides peak performance power under variable conditions (187 to 630 volts) for steady cuts and cleaner ending cuts.

• Power factor correction (PFC) uses input power more efficiently, ultimately using less energy.

• Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components.

• Fan on Demand™ cooling system only operates when needed, reducing the amount of airborne dust/dirt pulled through the unit.

• Superior gouging capability provides an extremely long gouging arc for those hard-to-reach, heavy applications. Plasma arc gouging produces less dust, smoke and other harmful environmental hazards compared to carbon arc gouging.

• CNC/Robotic Machine Interface is standard on all units, allowing automated control and rapid changeover to mechanized operation.

• Patented Ultra-Quick Connect™ torch offers the fastest plasma torch connection and removal in the industry.

• Starts without high-frequency so it will not interfere with or damage controls or computers.

• Miller’s rugged ICE-100T torch provides a rated cut of 1-1/4 in (32 mm), longer consumable life, and a torch cable that is more resistant to burns and cuts.

• Post Flow Cooling Circuit Protection to extend the life of consumables and the cutting torch is enhanced by our post-flow circuit that provides cooling gas after you release the trigger.

Detailed specs for Miller

• 208 - 575 V 3-Phase only

• Rated: 1-1/4 in (32 mm)
• Quality: 1-1/2 in (38 mm)
• Sever: 1-3/4 in (44 mm)

• 9.2 CFM (260 L/min.) at 100 PSI (698 kPa)

• 100 A at 160 VDC
• 380 - 575 V: 80% Duty Cycle
• 230 V: 50% Duty Cycle
• 208 V: 40% Duty Cycle

• With torch: 97 lb (44.0 kg)

Resources for Miller