Miller Millermatic 252 High Output MIG Welder, 230/460/575 V, 60 Hz - (907322)

• New! 15 ft (4.6 m), 250 amp M-25 MIG gun for .030/.035 in wire
• 10 ft (3 m) Work cable with clamp
• Factory - installed gas solenoid
• Argon mix regulator/flow gauge and hose
• 10 ft (3 m) power cord and plug (200/230 V model only)
• New! Factory-installed running gear with EZ-Change™ Low Cylinder Rack
• .030/.035 in reversible drive rolls
• Extra contact tips
• New! Set-up and operation interactive CD

• Welds material from 22 gauge to 1/2 in thick in a single pass. Highest output in its class.

• Highest output in its class (250 A at 28 VDC). Weld longer on high end applications.

• New! Large, digital front panel with built-in digital timers menu enables operator to preset voltage and wire feed speed. Standard run-in, pre/ostflow, burnback, spot/delay (stitch) timer menu.

• New! Auto Gun Detect™ allows operator to simply pull trigger on MIG gun, spool gun, or push/pull gun. Automatically detects and recalls the voltage, wire feed speed, and timer of the active gun.

• New! Push-Pull Gun Direct Connect - now directly connects your push-pull gun, no extra module required.

• New! Angled, dual-gear driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.

• New! EZ-Access™ Consumable Compartment and Parameter Chart - set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumables.

• New! Larger work area - now with longer 15-ft M-25 gun.

• Less weld cleanup with Active Arc Stabilizer™ pateneted Miller design provides excellent starts proven superior to the competition.

• Line voltage compensation keeps power constant even if input voltages varies by ±10%.

• Fan-On-Demand™ coooling system operates only when needed reducing power consumption and contaminants drawn into the machine.

Detailed specs for Miller Millermatic 252 High Output MIG Welder, 230/460/575 V, 60 Hz

• Requires 1- phase power

• 200 Amps at 28 VDC, 60% duty cycle
• 250 Amps at 28 VDC, 40% duty cycle

• 30 - 300 Amps

• 50 - 700 IPM (1.3 - 17.8 m/min)

• 207 lb (94 kg)

Miller Millermatic 252 High Output MIG Welder, 230/460/575 V, 60 Hz comes complete with:

• New! 15 ft (4.6 m), 250 amp M-25 MIG gun for .030/.035 in wire
• 10 ft (3 m) Work cable with clamp
• Factory - installed gas solenoid
• Argon mix regulator/flow gauge and hose
• 10 ft (3 m) power cord and plug (200/230 V model only)
• New! Factory-installed running gear with EZ-Change™ Low Cylinder Rack
• .030/.035 in reversible drive rolls
• Extra contact tips
• New! Set-up and operation interactive CD

Resources for Miller Millermatic 252 High Output MIG Welder, 230/460/575 V, 60 Hz

Manufacturer's Resources

- Product Fact Sheet
- Owner's Manual
- Warranty Information
- Miller MIG Welding Resources

General Welding Information

- Common Welding Supplies
- Welding Equipment
- Welding Fume Ventilation
- Welding Gear and Safety Tips

MIG Welding Articles

- Common MIG Weld Defects
- Tips on MIG Troubleshooting
- MIG Welding Settings
- MIG Welding Wire Feeder Selection
- Tips on How to MIG Weld
- MIG Shielding Gas Selection Guide
- MIG Welding Advantages/Disadvantages

MIG Welding How-to Videos

- MIG Uphill Welding Technique
- MIG Welding Principles

Home Welding Projects

- How to Weld a Table
- How to Make Extra Money from Welding Projects
- Video-How to Weld Dining Room Chairs
- Hobby Welding Projects for Beginners
- Welding a Dolly
- Small Welding Projects from Scrap
- Some Project Ideas
- Beginner Welding Projects
- Shop Stool
- Fun Welding Projects
- Reusable Welding Jig
- Video-Finishing Welding Projects with Proper Post Weld Cleaning
- Christmas Welding Projects