Miller - (907323)

• 10 ft (3m) power cord and plug
• 10 ft (3 m), M-10 MIG gun for.030/.035 in wire (0.8/0.9 mm)
• 10 ft (3 m) work cable with clamp
• Argon mix regulator/flow gauge with hose
• New! Factory-installed running gear with EZ-change™ Low Cylinder Rack
• .030/.035 in (0.8/0.9 mm) reversible drive rolls
• Extra contact tips
• New! Set-up and operation interactive CD

• DVI2 (Dual Voltage Input) easily plugs into either 115 or 230 Volt power without the use of tools - there is no primary power jumper links to change.

• Miller's exclusive Multi-Voltage Plug(MVP™) allows you to plug into either 115 or 230 V power. Choose the plug that fits your receptacle and attach it to the power cord - no tools required!

• New! Angled, dual-gear-driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob.

• Six taps provide welding range of 30 - 175 Amps with superior performance throughout its operating range. Welds materials from 22 gauge up to 3/8 in on 230 V power, and 22 gauge up to 3/16 in on 115 V power.

• Convenient MVP Adapter Storage for plugs that are not being used.

• New! Patent-pending EZ-Change™ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.

• Add the optional Spoolmate™ 3035 spool gun for aluminum welding with optional Spoolmate Gas Valve Kit. And with Miller's exclusive Gun-On-Demand™,simply pull the trigger for either gun and you're ready to weld. No wasted time toggling switches!

• New! EZ-Access™ Consumable Compartment and Parameter Chart - set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumable.

• New! Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.

• Less weld cleanup with Active Arc Stabilizer™ - patented Miller design provides excellent starts proven superior to the competition.

Detailed specs for Miller

• Requires 1-phase power

• 230 V operation: 150A at 23 VDC, 40% Duty Cycle
• 115 V operation: 90A at 18 VDC, 20% Duty Cycle

• 30 - 175 Amps

• 50 - 700 IPM (1.3 - 17.8 m/min)

• 169 lb (77 kg)

Resources for Miller

Manufacturer's Resources

- Owner's Manual
- Warranty Information
- Miller MIG Welding Resources

General Welding Information

- Common Welding Supplies
- Welding Equipment
- Welding Fume Ventilation
- Welding Gear and Safety Tips

MIG Welding Articles

- Common MIG Weld Defects
- Tips on MIG Troubleshooting
- MIG Welding Settings
- MIG Welding Wire Feeder Selection
- Tips on How to MIG Weld
- MIG Shielding Gas Selection Guide
- MIG Welding Advantages/Disadvantages

MIG Welding How-to Videos

- MIG Uphill Welding Technique
- MIG Welding Principles

Home Welding Projects

- How to Weld a Table
- How to Make Extra Money from Welding Projects
- Video-How to Weld Dining Room Chairs
- Hobby Welding Projects for Beginners
- Welding a Dolly
- Small Welding Projects from Scrap
- Some Project Ideas
- Beginner Welding Projects
- Shop Stool
- Fun Welding Projects
- Reusable Welding Jig
- Video-Finishing Welding Projects with Proper Post Weld Cleaning
- Christmas Welding Projects