Miller Spectrum 625 X-TREME Portable 40A Plasma Cutter With X-Case and 20 ft. Torch - (907404011)

• Portable - Cut up to 5/8" mild steel in the shop or at the job site - at 21 pounds, the shoulder strap allows the user to easily move from location to location.
• High Performance Cooling System with Fan-On-Demand™. High Performance Thermal Management System features new high-speed fan which only operates when torch trigger is engaged for improved reliability.
• X-CASE™ provides ultimate protection during transport and storage. Additional space ideal for consumable box, as well as gloves, eye protection, etc.
• Can be powered by any Miller engine drive with generator power at or above 8 kW (e.g. Bobcat™) or equivalent competitive equipment.

• Automatic Air Regulation - The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance.
• Automatic Consumable Detection - detects consumable type installed and adjusts gas pressure to optimize cutting performance, eliminating the need for a manual regulator.
• Auto-Refire™ Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal - all automatically! No need for manual re-triggering which reduces user hand fatigue.
• Auto Postflow calculates the length of postflow time based on the amount of cutting time to optimize consumable life and eliminate excessive air usage.
• LED indicators for power, pressure, cup and temperature allow faster troubleshooting, eliminating unnecessary downtime.

• Lower purchase and operating costs for the same cutting power and performance. The 40 Amp Spectrum 625 X-TREME provides similar ½” mild steel cutting speeds as higher amperage competitive models. The Spectrum 625 X-TREME more efficiently uses power in the cutting arc to deliver faster cutting speeds at lower output amperages and draw less power from the wall.

• LVC™ line voltage compensation provides peak performance power under variable conditions (187 to 264 volts) for steady and cleaner ending cuts.

• Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.
• Fan-On-Demand™ cooling system only operates when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit.

• Plasma cutter
• ICE-40T hand-held torch with 12 ft (3.7 m) or 20 ft (6.1 m) cable
• Heavy-duty work clamp with 12 ft (3.7 m) or 20 ft (6.1 m) cable
• X-CASE™ provides protection in transport and storage 12 ft (3.7 m) power cord
• Consumables box with 2 standard electrodes, 1 extended electrode, 2 standard tips, 1 extended tip, and deflector
• Shoulder strap

Detailed specs for Miller Spectrum 625 X-TREME Portable 40A Plasma Cutter With X-Case and 20 ft. Torch

• Rated: 5/8 in at 12 IPM*
• 1/4" at 60 IPM*
• *Inches Per Minute

• 208 - 230 V 1 Phase

• 6.0 SCFM (170 L/min.) at 90 PSI MIN (621 kPa) 120 PSI MAX (828 kPa)

• 40 A at 140 VDC, 50% duty cycle

• 12 ft torch: 21 lb (9.5 kg)
• 20 ft torch: 23 lb (10.4 kg)

Miller Spectrum 625 X-TREME Portable 40A Plasma Cutter With X-Case and 20 ft. Torch comes complete with:

Resources for Miller Spectrum 625 X-TREME Portable 40A Plasma Cutter With X-Case and 20 ft. Torch