Miller Millermatic 212 Auto-Set Dual-Gear-Driven MIG Welder, 200(208)/230V, 60 Hz - (907405)

• 7 ft (2.1 m) power cord and plug (208/230 V model only)
• 15 ft (4.6m), 250 amp M-25 MIG gun for .030/.035 in wire
• 10 ft (3 m) work cable and clamp
• Argon mix regulator/flow gauge w/hose
• Extra contact tips
• Factory-installed running gear with EZ-Change™ Low Cylinder Rack
• .030/.035 in reversible drive rolls
• Set-up and operation interactive CD
• New! Material thickness gauge

• Auto-Set feature makes set up quick and easy.

• Welds material from 22 gauge to 3/8 in thick in a single pass. Now with new angled drive system and other great new features.

• Seven taps provide wider welding range of 30-210 amps with improved high and low ends to weld materials from 22 gauge up to 3/8 in (9.5 mm) thick in a single pass.

• New! Angled, dual-gear-driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob.

• New! Patent-pending EZ-Change™ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.

• Add the optional Spoolmatic 15A or 30A spool gun for aluminum welding. Easy to install with direct hook up. And with Miller's exclusive Gun-On-Demand™,simply pull the trigger for either gun and you're ready to weld. No wasted time installing modules and using toggle switches.

• New! Thermal Overload Protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.

• New! Larger work area now with longer 15-ft M-25 gun.

• Less weld cleanup with Active Arc Stabilizer, patented Miller design provides excellent starts proven superior to the competition.

Detailed specs for Miller Millermatic 212 Auto-Set Dual-Gear-Driven MIG Welder, 200(208)/230V, 60 Hz

• Requires 1-Phase Power

• 160 Amps at 24.5 VDC, 60% duty cycle

• 30 - 210 Amps

• 50 - 700 IPM (1.3 - 17.8 m/min)

• 190 lb (86 kg)

Miller Millermatic 212 Auto-Set Dual-Gear-Driven MIG Welder, 200(208)/230V, 60 Hz comes complete with:

• 7 ft (2.1 m) power cord and plug (208/230 V model only)
• 15 ft (4.6m), 250 amp M-25 MIG gun for .030/.035 in wire
• 10 ft (3 m) work cable and clamp
• Argon mix regulator/flow gauge w/hose
• Extra contact tips
• Factory-installed running gear with EZ-Change™ Low Cylinder Rack
• .030/.035 in reversible drive rolls
• Set-up and operation interactive CD
• New! Material thickness gauge

Resources for Miller Millermatic 212 Auto-Set Dual-Gear-Driven MIG Welder, 200(208)/230V, 60 Hz

Manufacturer's Resources

- Product Fact Sheet
- Owner's Manual Search
- Warranty Information
- Miller MIG Welding Resources

General Welding Information

- Common Welding Supplies
- Welding Equipment
- Welding Fume Ventilation
- Welding Gear and Safety Tips

MIG Welding Articles

- Common MIG Weld Defects
- Tips on MIG Troubleshooting
- MIG Welding Settings
- MIG Welding Wire Feeder Selection
- Tips on How to MIG Weld
- MIG Shielding Gas Selection Guide
- MIG Welding Advantages/Disadvantages

MIG Welding How-to Videos

- MIG Uphill Welding Technique
- MIG Welding Principles

Home Welding Projects

- How to Weld a Table
- How to Make Extra Money from Welding Projects
- Video-How to Weld Dining Room Chairs
- Hobby Welding Projects for Beginners
- Welding a Dolly
- Small Welding Projects from Scrap
- Some Project Ideas
- Beginner Welding Projects
- Shop Stool
- Fun Welding Projects
- Reusable Welding Jig
- Video-Finishing Welding Projects with Proper Post Weld Cleaning
- Christmas Welding Projects