Miller - (951146)

• Millermatic 212 Auto-Set MIG power source
• 15 ft (4.6 m), 250 amp M-25 MIG gun
• 15 ft Spoolmatic 15A spool gun for aluminum welding
• Work cable and clamp
• Factory-installed dual gas solenoids
• Argon mix regulator/flow gauge with hose
• Industrial power cord and plug
• Factory-installed running gear/cylinder rack
• .030/.035 in reversible dual groove drive rolls
• Extra contact tips
• Set-up and operation CD

• Welds material from 22 gauge to 3/8 in thick in a single pass. Now with new angled drive system and other great new features.

• Seven taps provide wider welding range of 30-210 amps with improved high and low ends to weld materials from 22 gauge up to 3/8 in (9.5 mm) thick in a single pass.

• New! Angled, dual-gear-driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob.

• New! Patent-pending EZ-Change™ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.

• Add the optional Spoolmate™ 3035 spool gun for aluminum welding. Easy to install with direct hook up. And with Miller's exclusive Gun-On-Demand™,simply pull the trigger for either gun and you're ready to weld. No wasted time installing modules and using toggle switches.

• New! Thermal Overload Protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.

• New! Larger work area now with longer 15-ft M-25 gun.

• Less weld cleanup with Active Arc Stabilizer, patented Miller design provides excellent starts proven superior to the competition.

Detailed specs for Miller

• Requires 1-Phase Power

• 160 Amps at 24.5 VDC, 60% duty cycle

• 30 - 210 Amps

• 50 - 700 IPM (1.3 - 17.8 m/min)

• 190 lb (86 kg)

Resources for Miller

Manufacturer's Resources

- Product Fact Sheet
- Owner's Manual
- Warranty Information
- Miller MIG Welding Resources

General Welding Information

- Common Welding Supplies
- Welding Equipment
- Welding Fume Ventilation
- Welding Gear and Safety Tips

MIG Welding Articles

- Common MIG Weld Defects
- Tips on MIG Troubleshooting
- MIG Welding Settings
- MIG Welding Wire Feeder Selection
- Tips on How to MIG Weld
- MIG Shielding Gas Selection Guide
- MIG Welding Advantages/Disadvantages

MIG Welding How-to Videos

- MIG Uphill Welding Technique
- MIG Welding Principles

Home Welding Projects

- How to Weld a Table
- How to Make Extra Money from Welding Projects
- Video-How to Weld Dining Room Chairs
- Hobby Welding Projects for Beginners
- Welding a Dolly
- Small Welding Projects from Scrap
- Some Project Ideas
- Beginner Welding Projects
- Shop Stool
- Fun Welding Projects
- Reusable Welding Jig
- Video-Finishing Welding Projects with Proper Post Weld Cleaning
- Christmas Welding Projects