Smith Heavy Duty 40 Series - Acetylene Regulator - CGA 510 Inlet - (40-15-510)

Smith Heavy Duty 40 Series - Acetylene Regulator - CGA 510 Inlet

The new Series 40 regulators have been designed and built to outperform any similar sized regulator on the market. Series 40 Regulators are constructed with greatly improved design features. The new design provides a family look to complement the Series 30 regulator line-up. Series 40 regulators provide the highest gas flow in their class. Single stage models are available for high pressure as well as liquid cylinders. There are also single gauge models available for manifold station applications.

• The number one cause of regulator failure is debris on the high pressure seating surface.

• The new Series 40 regulator is constructed with a super-fine 15 micron, nickel plated bronze filter which encapsulates the high pressure seat.

• This filter protects the seating surface from contamination by external debris that may enter the regulator during operation.

• This in turn will reduce failures and dramatically extend the regulators service life.

• Series 40 regulators are constructed with a durable yet sensitive, stainless steel diaphragm for long dependable service life in most any environment.

• These new designs are capable of much higher gas flows than the current Smith 1500 series regulator models.

• Some models are capable of producing flows of over 16,000 SCFH, up to 25% higher than comparable competitors heavy duty regulators.

• They also provide extremely accurate outlet pressure of approximately ±2% of the actual gauge reading (center of scale).

• Decay/Rise is also very low at only .4 PSIG outlet rise per 100 PSIG tank pressure decay, helping maintain consistent and highly accurate outlet pressures and flows.

• This design eliminates the need for diaphragm replacement in the event of over-pressurization.

• The stainless steel diaphragm is suitable for use with liquid (cryogenic) gases.

Applications:

• Pressure Regulation, Single Stage
• Oxy-Fuel Cutting, Welding & Heating
• High Flows
• Cryogenics
• Higher Pressures
• Manifold Gas Feed
• Manifold Station Drops

Detailed specs for Smith Heavy Duty 40 Series - Acetylene Regulator - CGA 510 Inlet

Acetylene Regulator

Part Number: 40-15-510
Delivery Pressure: 0-15 PSIG
Inlet Connection: CGA 510

Resources for Smith Heavy Duty 40 Series - Acetylene Regulator - CGA 510 Inlet

Manufacturer’s Resources

- Regulator Selection Guide
- Combination Torch Tip Reccomendations
- Straight Torch and Machine Torch Tip Reccomendations
- Torch Selection Guide
- Warranty Information
- Outfit Selection Guide
- Complete Product Catalogue

Cutting Torch Information

- Gas Regulation FAQs
- The X's and O's of Oxyfuel
- Oxyfuel Resources
- Cutting and Weld Preparation
- Properties of an Acetylene Torch
- Torch Cutting Overviews and Tips
- How to set-up an Oxyacetylene Torch
- Acetylene Cutting Torch Instructions
- Torch Operation FAQs
- Jewler’s Torches FAQs
- Cutting Torch FAQs
- Identifying the Right Cutting and Welding Tips
- What is an Acetylene Cutting Torch?

General Welding Information

- The Root Causes of Weld Defects
- About the American Welding Society
- 10 Tips to Reduce Your Welding Costs
- The History of Welding
- Welding Terms
- The Physics of Heat
- Causes and Cures of Common Welding Troubles
- Common Welding Supplies
- From Mining to Welding: A Metals Resource Guide
- Welding Equipment
- Welding Generators Offer Emergency Power

Safety Articles

- Oxy Welding Safety
- Safety: The Burning Issue in Oxy-fuel Torch Use
- Gear and Safety Practice Tips
- Welding Fume Info-Ventilaton
- AWS Safety and Health Facts-Burn Protection
- Eye and Face Protection
- Preventing Torch Fires in Welding and Cutting Operations
- How to Avoid and Treat Weld Burns
- How to Extend Your Welding Life Expectancy
- Safety tips: The Hazards of Welding Sparks
- Welding Safety Resources
- The Ten Welding Commandments

Welding Projects

- How to Weld a Table
- How to Make Extra Money from Welding Projects
- Video-How to Weld Dining Room Chairs
- Hobby Welding Projects for Beginners
- Welding a Dolly
- Small Welding Projects from Scrap
- Some Project Ideas
- Beginner Welding Projects
- Shop Stool
- Fun Welding Projects
- Reusable Welding Jig
- Video-Finishing Welding Projects with Proper Post Weld Cleaning
- Christmas Welding Projects